VOLTAGE REGULATOR DRIVER BOARD

• 17 configurable Voltage outputs total.

• 6 Layer PCB design with supply and shielding layers

• Compact size 4.4” X 5.75” (113mm X 146mm)

• SMD construction

• I/O points on standard .1 inch pitch

• 4 6-32 Mounting pads for flexible mounting options

2 LINEAR FIX VOLTAGE D2PAK STYLE PACKAGEs

• No On or Off control

• 2 Isolated supply side inputs

15 OUTPUTS BASED ON DIODES INC. AP1501 150KHZ, 3A PWM BUCK DC/DC CONVERTER

• 4 isolated power supply buss inputs total

• High speed operation.

• On time is 118uS

• Off time is 712uS(.7ms) This is dependant on load and output capacitors.

3 OUTPUT VOLTAGES CONFIGURations

• Fixed 3.3V, 5.0V and 12V output

• Adjustable from 1.2V to 40V with Resistor divider

• Adjustable from 1.2V to 40V with pot

• Single power supply buss input

12 CONTROLLED CONFIGURABLE VOLTAGES

• Fixed 3.3V, 5.0V and 12V output

• Adjustable from 1.2V to 40V with Resistor divider

• Adjustable from 1.2V to 40V with pot

• External opto isolated On and Off control

• 3 isolated power supply buss inputs

ADDITIONAL FEATURES

• All outputs have LED power out / On indication

• Major power supply input buss’s have power On indication

• 2 independent output ground busses

• 1 isolated input / control ground

• 12 channels fully opto isolated, configurable for 3.3V logic and up

• All components are SMT. (Jacks are through hole)

• Jacks are point redundant. (2 pins per I/O point)

USES

• Multi channel Pneumatic, Hydraulic solenoid driver

• Multi channel voltage regulator board with remote on / off

• Simple 3A stepper driver