|
|
|
|
 This fully redundant, dual channel LED Annunciator Panel displays 15 sunlight readable cells. Each cell color and text is fully configurable. The unit automatically self tests during power on. The compact design with one MS connector eliminates the need for multiple individually wired indicators cutting material and installation costs; as well as increasing reliability.
Details »
|
|
|
|
|
 High Precision, High Capacity, Ultra Flexibility; never before have these qualities come together on such an affordable machine with no compromises.
The MOTION BRUTE base platform is offered with tooling for a variety of processes and can be adapted for custom applications. MOTION BRUTE is very economical and rugged enough for 24/7 production.
MOTION BRUTE is flexible and scalable for large work areas with no loss in speed, precision or accuracy. This scalability is achieved using rotating nut ball-screw actuator technology seen only on high end equipment several times the cost of the MOTION BRUTE system.
Details »
|
|
|
|
|
- Four analog/counter input channels standard
- Displays 4 channels of analog / counter input
- Back lit LCD display
- Allow routing of any analog channel to any display location
- Remote Display Connection
- DSPic6014A Microprocessor
- On board 3 amp voltage regulators for microprocessor and signals
- 6 layer PCB with internal ground and shield planes for noise free operation
- Wide Temperature range: -20C ~ 65C
- External programming unit with encoder / push wheel and graphic/text display
- On board programming port for firmware updates and program development / diagnostics
Details »
|
|
|
|
|
- DSPic6014A Microprocessor
- Internal EEPROM
- 8K data space
- 144K program space
- 30 MIPS processing speed
- 16 analog input channels, 12 bit resolution (5 channels optically isolated & bi-polar input range)
- 2 PWM output channels
- 40+ Digital I/0
- Five optically isolated bi-polar analog input channels with hardware input filters & scaling resistors
- Optically isolated I2C bus
- Buffered RS232/SPI #1 Bus with EMI filters
- Second TTL level SPI Bus
- Two 0 ~ +5G accelerometers with internal diagnostics
- On board MicroChip 24A32AP EEPROM memory
- On board MicroChip MCP9800 temperature sensor
- On board 1 amp regulators for microprocessor and analog isolation
- On board optically isolated pseudo H-Bridge / PWM channel to drive hydraulic servo valves or other differential loads
- On board PWM channels for analog output(s)
- 6 layer PCB with internal ground and shield planes for noise free operation
- Wide Temperature range: -20C ~ 65C
Details »
|
|
|
|
|
- Sealed to IP67
- Antireflective glass minimized glare
- Wide Temperature range: -20C ~ 65C
- LCD text/graphics display
- 144 X 32 bit graphic display
- Number of Dots: 4608
- Display area: 57.45mm X 13.93mm (X x Y)
- Display Type: Positive Transflective
- Viewing Environment: Sunlight readable, Back lit
- Backlite Color: Light Blue, Yellow/Green (optional)
- Generates ASCCI text or bitmap graphics
- Siliconix ST7920 software command set
- SPI interface @ RS232 voltage levels
- Parallel interface available (optional connector required)
- Daisy chain communication and power output for downstream display
- Viewable in direct sunlight
Details »
|
|
|
|
|
Pre-Packaged Motion Systems with Vision Guidance
Custom OEM Level Motion Controls
- Highly Integrated PC-Based Controls
- Cost-Effective Solutions Designed for Specific Applications
Vision Inspection Stations
- Banner Vision
- Adept Vision
Details »
|
|
|
|
|
 The Air Tractor AT-802F and the Fire Retardant Dispersal System (FRDS) have grown up together. Proven to be a formidable firefighting system since its introduction in 1993, the AT-802F aircraft and the Generation II FRDS are now set to move single engine air tanker firefighting into a new era of improved control, reliability and overall effectiveness.
Details »
|
|
|
|
|
 Contracted by Howell Instruments to create a 3D rendering of a Dyno Room for use in a proposal. The old cliche holds true, a picture is worth a thousand words; 3D renderings of ideas and designs not yet brought into the tangible world can add serious value to presentations and proposals.
Details »
|
|
|
|
|
 The Fire Retardant Dispersal System (FRDS) was designed by Victor Trotter while at the now defunct Spectra Technologies in 1991 to go on the Air Tractor 802 aircraft to fill a fire fighting roll. The system was, and still is, the leader in the field, allowing retardant delivery at unsurpassed precision levels.
Details »
|
|
|
|
|
- 17 configurable Voltage outputs total.
- 6 Layer PCB design with supply and shielding layers
- Compact size 4.4” X 5.75” (113mm X 146mm)
- SMD construction
- I/O points on standard .1 inch pitch
- 4,6-32 Mounting pads for flexible mounting options
Details »
|
|
|
|
|
- Saves a minimum of 200 terminations
- Back panel space requirements greatly reduced
- Din rail mountable for easy installation
- Enables use of d-sub extension cables
- SIO section is easily configurable for NPN and PNP operation
- User interface section provides easy connection of system and emergency stop wiring
- All necessary fusing is incorporated on board
- LED indicator in each section for DC power present
- Clearly marked with Adept nomenclature
- Provides for quick organization of I/O layout
Details »
|
|
|
|
|
- PIC30F6014 Microcontroller (30MIPS mp)
- Optically Isolated Inputs/Outputs
- Relay Outputs
- 16 Channel Analog Inputs/PWM Outputs
Details »
|
|
|
|
|
- PIC16F876A Microcontroller
- SSI Encoder Interface
- Analog Inputs/OWM Outputs
- Optically Isolated Digital I/O
- ±40mA Valve Drive Current
- Customer Internal Sequence Cabability and “Slave” Operation
Details »
|
|
|
|
|
- Clear Weld
- Soldering
- Screw Driving
- Dispensing
Details »
|
|
|
|
|
- Small size, 2.1 by 5.75 inch
- Controller and supply can be split into separate PCB’s
- Simple 1:1 jumpers for 1 piece operation
- 4 layer design with internal busses and ground shields
- I/O points on standard .1 inch header
- 10, 6-32 mounting pads for flexible mounting options
Details »
|
|
|
|
|
- 7 Voltages in on Unit
- 19v ~ 48v Input Range
- +24v at 15 amps, +5v at 3 amps, ±15v at 500mA, +5v at 1.0 amp, +12v at 1.0 amp
- Parallel Operation for Redundancy (Two Unit)
- Utilizes Mil-Spec Vicor EMI Filters and Converters
- On-Board Remote Fault Indication
- On-Board Set Point Controller
Details »
|
|
|
|
|
- Converts RS232 levels to TTL for VFD/LCD
- On board power supply and regulator for display and level shifting circuits.
- Can be configured for VFD or LCD type display
- Small size, 1.6 by 3.9 inch ( 40 by 100mm)
- Buffers TTL levels back to RS232 for transmitting to next VFD/LCD daisy chained display
- RS232 / SPI Data signal indicator
- RS232 / SPI Clock signal indicator
- RS232 / SPI Reset/CS signal indicator
- RS232 / SPI Busy signal indicator
- TTL / SPI Busy Signal Indicator
- Jumper to terminate “Busy”
- 4 layer design with internal busses and ground shields
- SMD construction
- I/O points on standard .1 inch pitch
- Mounting pads for flexible mounting options
- Power can be fed through daisy chain network cabling
- EMI/RF filtering
- Power On indicator
Details »
|
|
|
|
|
- 32 digital I/O points configurable in 8 point blocks as ether input or output.
- Each 16 points configurable with Address jumpers allowing 8 different address.
- Based on Microchip MCP23016 I2C I/O expander ic.
- Industry standard I2C communications.
- On board I2C Test pads
- On board RS232 to TTL level communications conversion.
- Power via external source if needed.
- On board fused power supply and regulation.
- 4 independent power busses individually fused and indicated.
- 6-32 mounting pads (7)
Details »
|
|
|
|
|
- In Rush Current Limiter
- Protects Fuses During In Rush
- Fits EX100 and T2 Series Toshiba PLCs
Details »
|
