• 15 sunlight readable LED annunciators
• Fully Redundant Dual Channel indication per annunciator cell
  • Dual Voltage Supplies
  • Dual Self Test Functions
  • Dual Voltage Comparison Circuits
  • Control reliable, redundant design throughout
• Cell colors configurable.
• Cell identification text is configurable
• Customization configurable
• 8 inputs configurable as sink or source
• 1 input configurable as sink or voltage compare
• 5 inputs set as sink input.
• 12 to 38V operating voltage.
• Power on self test system
• Dual independent power supplies
• Extremely compact design
• Sealed Black Anodized Aluminum Chassis
• LED Technology
  • Almost no self heating due to extremely efficient design
  • No more burned out bulbs
  • Built in dual channel self test function
• RFI and EMI filtering / shielding
• Bayonet Style MS Connector ~ Quick disconnect connector

The LED Annunciator Panel includes 15 individual display cells. Each cell contains 2 ultra bright led’s.

Each cells led’s powered from separate power supplies allowing redundant operation.  If one power supply fails only one LED per cell stops operating.

Power on self test function incorporates 2 independent systems to prevent either from failing the display system.

One LED in each cell is illuminated continuously while the other LED flashes at 1 second on off rate for 10 seconds. This allows all LED indicators to be tested even indicators normally on at power up like low oil pressure.

One system runs the 10second continuous LED cell and the other runs the flashing LED cell. A timer or power failure is indicated by a failure of one or the other LED in each cell.

A single LED failure is indicated by only one LED not functioning during self test.

One Cell can be configured using a precision voltage reference circuit to indicate low battery voltage.

Uses two independent comparator and LED driver circuits for indication redundancy.

Standard model is configured as follows.

• +24V system
• Low battery or charge current. (Generator Out)
• Low voltage indication configured at 24.5V (+/-0.25V).
• Normal operation indicated at 25V (Voltage delta of .5 Volts +/- 0.1V)

Temperature stability within +/- .1 Volts  (32 – 140Deg F)

High Precision, High Capacity, Ultra Flexibility; never before have these qualities come together on such an affordable machine with no compromises.

The MOTION BRUTE base platform is offered with tooling for a variety of processes and can be adapted for custom applications. MOTION BRUTE is very economical and rugged enough for 24/7 production.

MOTION BRUTE is flexible and scalable for large work areas with no loss in speed, precision or accuracy. This scalability is achieved using rotating nut ball-screw actuator technology seen only on high end equipment several times the cost of the MOTION BRUTE system.

Series

Robot Specs

Configurations

Available Options

This assembly is suitable for a variety of display and control applications.

This assembly comes standard with 4 analog/counter inputs, an LCD display, a connection for an external Encoder/Programming unit, a connection for a remote display, and an internal power supply.

The standard unit is supplied in a very compact enclosure with sealed connectors.

Optional enclosure styles and expansion boards can be provided to tailor the system for a specific application.

Customer enclosures sealed to IP67 can be provided to allow operation in extremely harsh conditions.

Features:

• Four analog/counter input channels standard
  • 0-5V, 0-10V, 4-20ma, other voltage available
  • Optically isolated counter inputs
  • Analog and digital filters for each channel
  • 12 bit resolution
• Displays 4 channels of analog / counter input
  • Large easy to read numbers
  • Units text for each channel
  • Display in engineering units
    • 28 non-linear lookup tables to scale inputs included
  • EEPROM storage of configuration
• Back lit LCD display
  • 144 X 32 bit graphic display
  • Display Type: Positive Transflective
  • Viewing Environment: Sunlight readable, Back lit
  • External voltage input controls LCD back light intensity via lookup table
  • Backlite Color: Light Blue, Yellow/Green (optional)
• Allow routing of any analog channel to any display location
  • Supports 255 user defined configurations
  • Supports 28 non-linear lookup tables
  • Supports 8 linear sensor types
• Remote Display Connection – The DMS can drive remote LCD displays. See DS-0015 for information on the IP67 rated remote display.
• DSPic6014A Microprocessor
  • Internal EEPROM
    • 8K data space
    • 144K program space
  • 30 MIPS processing speed
  • 16 analog input channels, 12 bit resolution (4 channels with input filters and scaling resistors)
  • 2 PWM output channels
  • 40+ Digital I/0
• On board 3 amp voltage regulators for microprocessor and signals
• 6 layer PCB with internal ground and shield planes for noise free operation
• Wide Temperature range: -20C ~ 65C
• External programming unit with encoder / push wheel and graphic/text display
• On board programming port for firmware updates and program development / diagnostics

Special configurations available:

Minimum order quantities may apply

• Currently Available Options
  • On board PWM channel for analog output
  • Buffered RS-232 output
  • Buffered SPI output
  • Additional analog inputs
  • Additional analog input voltage ranges
  • I2C, SPI bus
• Non-Standard Options
  • IP67 Enclosure
  • Optically isolated bi-polar analog inputs
  • Optically isolated I2C bus
  • RS-422/85 external connection
  • On board step motor control capability
  • On board H-bridge capability
  • On board servo valve control capability
  • Other board peripherals available
    • Accelerometer
    • Photo Eye
    • Temperature sensor
  • Daughter boards for special I/0 functions
  • Custom configurations

This circuit board consists of a MicroChip DSPIC6014A digital signal processor and various voltage regulators, communication buffers, analog opto-isolators, RS-232/SPI communication buffer and other support components.

This assembly is suitable for a variety of display and control applications.

This assembly can be provided in a housing with integral power supply, LCD or Vacuum Fluorescent display, and operator interface switches.

This display is compatible with the second generation Fire Retardant Dispersal System (FRDS GENII) and various products that support buffered SPI communication.
A typical application of this display is used to remotely indicate the quantity of fluid present in the aircrafts liquid hopper.
The specifications listed here are compiled from various component datasheets used in the manufacturing of the device.

• EPSON
• Adept
• Staubli

Custom OEM Level Motion Controls

• Highly Integrated PC-Based Controls
• Cost-Effective Solutions Designed for Specific Applications

Vision Inspection Stations

• Banner Vision
• Adept Vision

• 17 configurable Voltage outputs total.
• 6 Layer PCB design with supply and shielding layers
• Compact size 4.4” X 5.75” (113mm X 146mm)
• SMD construction
• I/O points on standard .1 inch pitch
• 4,6-32 Mounting pads for flexible mounting options

2 linear fix voltages based on D2pak style package.

• No On or Off control
• 2 Isolated supply side inputs

15 outputs based on Diodes Inc. AP1501 150kHz, 3A PWM Buck DC/DC Converter

• 4 isolated power supply buss inputs total
• High speed operation.
• On time is 118uS
• Off time is 712uS(.7ms) This is dependant on load and output capacitors.

3 output voltages configurable with

• Fixed 3.3V, 5.0V and 12V output
• Adjustable from 1.2V to 40V with Resistor divider
• Adjustable from 1.2V to 40V with pot
• Single power supply buss input

12 controlled configurable voltages with

• Fixed 3.3V, 5.0V and 12V output
• Adjustable from 1.2V to 40V with Resistor divider
• Adjustable from 1.2V to 40V with pot
• External opto isolated On and Off control
• 3 isolated power supply buss inputs

Additional features

• All outputs have LED power out / On indication
• Major power supply input buss’s have power On indication
• 2 independent output ground busses
• 1 isolated input / control ground
• 12 channels fully opto isolated, configurable for 3.3V logic and up
• All components are SMT. (Jacks are through hole)
• Jacks are point redundant. (2 pins per I/O point)

Uses:

• Multi channel Pneumatic, Hydraulic solenoid driver
• Multi channel voltage regulator board with remote on / off
• Simple 3A stepper driver